Multi Axial Compaction System
Side compaction / Splitted die
Multiaxial compaction systems for complex geometries - cross hole, side compaction, open and splitted die.
Splitted die with adjustable mechanical stops
Splitted Die
Highest precision / Positioned base body
Maximum rigidity combined with maximum precision. Clearence up to 0,003 mm possible. Mechanically adjustable fixed stops.
Positioning of the die body by SCS K cone system.
Reusable base body
Base body reusable and compatible with a wide range of die segments. Mechanical stops can be set outside the press in the die shop.
Die segments with quick coupling system
Coupling system for fast and high-precision connection of the die segment with the electric drive model EDU.
Splitted die 4 fold, adjustable mechanical stops, filler plate
The “open” and “splitted” die processes require high-precision adjustable mechanical stops against which the die segments can be clamped.
The high-precision mechanical stops are integrated in the die body and can be adjusted from above in 1 µm steps using adjusting screws. The die body guides the die segments and is positioned and bolted to the vertical pressing axis with high precision via the SCS K cones and the MCS C260 exchangeable plate.
The mechanical stops can be set outside the press or on the press using the MAS-xi measuring system or the respective upper punch.
The adaptation to the part geometry will be done by the die segments. The die body with the adjustable mechanical stops can be used in accordance to twofold to sixfold arrangement several times.
The basic die body with adjustable mechanical stops is available for 2 to 6-fold arrangements and can also be used without stops if required.
Multi axiale compaction - 6 fold arrangement
ProGrit supplies a multiaxial compaction system for the economical and high-precision production of complex geometries:
- Complete tool system
- Split die with adjustable mechanical stops with positioning accuracy of 0,001 mm
- Upper, lower punch and center pin
- Filler plate
- Electric drive unit with holding force of 3 to 35 tons for 1-6-fold arrangement, controlled positioning accuracy +/- 0,001 mm and optional force measurement
- Control unit for electric drive modules
- Positioning system for mold and drive modules – MCS C interchangeable plate system
- Automatic setting system for the axes of the electric drive units (Auto Setup)
- MAS-xi measuring system for measuring the transverse axes to the vertical press axis
- Handling for the installation and removal of electric drive units and tool systems
